• Lightweight two-piece rover rods are perfect for all GNSS applications

• Two-piece rover rods come in aluminium or carbon fiber and feature 5/8 x 11 tips

• Features include 40-minute circular vial, vinyl hand-grip, and replaceable steel point

• 5125-06-YEL and 6128-08 includes a cable management slot measuring 16 x 40-mm, to hide cables

• Many find tehse rover rods are faster to setup and more user-friendly than traditional rods

• Include a one-piece design and two locking systems for stability

• The snap lock prevents slippage and the compression lock centers the telescopic inner pole and maintains straightness

• Comes with a 40-minute vial

• Designed so the GNSS surveyor has all the features needed in a single rod

• The included pin can lock the length of the rod at set points

• Zero Height (0 H.T)

• Carbon fiber makes these rods 30% lighter

• TLV™ lock comes standart

• Graduated to read direct for a 135 mm prism height

• Carbon fiber pole offers a stainless steel pin which locks the inner pole

• Adapters will achieve other prism heights

• TLV lock which has a 40-minute vial built-in

• Features metric graduations for GPH1-type prisms, a Swiss-style tip (for 86 mm prism heights) and TLV lock

• Extends to 2.60 m

• Collapses to 1.51 cm

• Outside diameter of 32 mm

• Weighs 1.50 kg

• Part no.  5521-11

• The Quick Lever with Vial (QLV) allows fast, simple setups

• Includes a lock with 40-minute level vial

• Metric graduations (cm)

• Extends to 2.60 m

• Collapses to 1.516 m

• Simple to adjust bubble and lever tension

• Wighs 1.50 kg

• Part no.  5821-10

• Designed to be compatible with all targets, prisms, and GNSS antennas

• Using adapters, any of the poles in this series can be used for GNSS, robotics or total station surveys

• Quick conversion to another application by changing adapters (sold separately, see below)

• TLV (Twist-Lock with Vial) locking mechanism includes a 40-min vial

• Available with or without locking pin & holes (the locking pin system guarantees no slipping of the sections)

• Includes adapter 2090-12

• Carbon fiber and aluminum models offered

• 2 millimeter metric graduations (cm/2 mm)

• Three models available; 135 mm HT, 0 mm HT, and adjustable tip

• TLV™ is the most dependable locking mechanism on the market place

• Soft touch knob is easy to tighten and loosen

• High-visibility vial features 40-minute sensitivity

• Easy access screws are located underneath for quick calibration

• Extends to 2.60 m

• Collapses to 1.52 m

• The aluminium twistign lock with vial (TLV) pole is wear-resistant for long life

• One- and two-section poles have TLV locks

• 3-section poles feature a twisting lock and a vial on the pole

• The soft rubber knob is easy to tighten or loosen, even when wearing gloves

• TLVs feature a convenient 40-minute vial built into the lock

• Powder-coated and silk screened aluminum

• The lightest pole offered by SECO

• The inner and outer poles are constructed of lightweight nonconductive
fiberglass

• Reduced weight SECO TLV™ lock

• Included in this package is Crain’s patented Topo Boot®

• Features include a 40-minute adjustable vial, a soft touch knob, and adjustable 5/8 x 11 tip

• These ‘no-frills’ imported poles are designed to give service in the field at a lower purchase price

• TLVs and twist-locks include 40-minute level vials

• Aluminum outer and inner pole

• Hardened steel points

• Metric (cm) graduations

• Traditional red and white color with Crain logo

• This ‘no-frills’ imported one-section pole is designed to give service in the field at a lower purchase price

• Aluminum outer and inner pole

• 40-minute level vial

• Fixed tip and Hardened steel points

• Compression locking

• Metric Grad (cm)

• Length 2.50 m

• Weighs 1.20 kg

• Part No. 5631-10

• Ceiling Pole adjusts 81-320 cm

• The laser platform adjusts vertically and locks tight at any location—perfect for interior construction

• Part No. 7220-01

• Short 2.1 meter Telescopic Rod

• With a TLV locking mechanism

• Centimeter graduations

• Set for a 100 mm Prism Height

• Powder-coated aluminum Fluorescent Orange

• Weighs 1.09 kg

• Part no. 5512-12-FOR

• The Claw™ is a clamping system featuring an innovative clamping device that keeps your expensive data collecting hardware snug on the pole where it belongs without crushing it

• The Claw cradles and clamps are made of durable anodized
aluminum for years of trouble-free use in the field

• Quick-Release cradles plug directly in to Quick-Release Pole Clamps

• Features the original Open-Style Clamp technology designed by SECO

• Use a Claw Quick-Release cradle or a standard cradle and one of the popular open clamps for a complete solution

• Features a quick-release button and a stainless steel clamp screw that attaches to the pole

• Depressing the quick-release button will allow the Claw Quick-
Release cradle or standard cradle to rotate in to a comfortable position for reading the data collector or controller

• Designed for standard poles or rods with a 19 to 32 mm OD

• Manufactured from black anodized aluminum

• Features open-style pole clamp

• Скоба от отворен тип

• Made of durable anodized aluminum for years of trouble-free use in the field

• Ram ball links allow many positions

• Designed for: Mesa/Tesla

• Weighs 0.48 kg

• Part no. 5200-17

• Holds the FC5000 (Topcon), RT3 (Carlson) and Mesa 2 (Juniper) tablets

• Ball-and-Socket version allows acollector to be in more positions

• All ports, connections, and camera are accessible and usable with the bracket attached

• Easy “snap i n/out” design holds the tablet securely

• Made from a single, solid 0.080-inch (2.03-mm) aluminum sheet metal which is powder-coated black

• Weights 0.43 kg

• Part no. 5200-35

• Assembly is for 32 mm OD poles

• Featuring a 40-minute vial (#D11232)

• Includes screws

• Weighs 0.06 kg

• Part no. 5081-40 - Vial for 32 mm OD Pole Levels w/ 40-minute sensitivity

• Part no. D11232 - 40-Minute Replacement Vial (including screws)

• Part no. D11233 - 20-Minute Replacement Vial (including screws)

• GPS Compass for 32 mm diameter pole

• Weighs 0.09 kg

• Part no. 5125-050

• The standard rod level features a die-cast aluminum body and an
adjustable vial

• Fits round or rectangular rods

• Use with track light, robotic instruments, or conventional leveling

• The snap-on level fits all poles with a 1-to-1.25-inch diameter

• Feature a 40-minute sensitivity

• Weighs 0.50 lb (0.22 kg)

• Part no. 5001-10

• Convenient for adjusting and calibrating pole vials in the office

• The adjusting jig features an ‘L-bracket’ to rest the prism pole point on and the adjustable top piece

• Use the adjustable top to center your pole before adjusting the bubble

• Weighs 0.45 kg

• Part no. 5195-01

• The pole extensions have 5/8 x 11 female threads on the bottom and 5/8 x 11 male threads on the top to allow more added sections

• Choose powder-painted aluminum, or carbon fiber

• Constructed of Aluminum

• Diameter: 20 mm

• Length: 325 mm

• Both ends feature 5/8 x 11 threads

• Red

• Weighs 0.32 kg

• Part no. А222

• Adapts Swiss-style snap-on prisms to 5/8 x 11 tribrach adapter or prism pole

• Weighs 0.03 kg

• Part no. 2080-00

• 5/8 х 11 adapter

• Weighs 0.03 kg

• Part no. 5180-00

• Adapts Swiss-style prism poles to 5/8 x 11

• Weighs 0.03 kg

• Part no. 2090-00

• 85.7 mm steel body

• Weighs 0.14 kg

• Part no. 5190-00

• 85.7 mm anodized aluminum body, dull steel point

• Weighs 0.07 kg

• Part no. 5194-03

• The Center Punch Point fits all poles or products with male 5/8 x 11 threads

• The hardened steel point will mark all metal and non-metal surfaces

• Weighs 0.09 kg

• Part no. 5194-10

• 85.7 mm length, 64 mm OD with steel body

• Weighs 0.57 kg

• Part no. 5192-00

• Allows easy conversions from ‘control’ to ‘topo’ surveys

• Part no. 5192-02

• Standard topo shoe length, 85.7-mm, compatible with all SECO Poles

• 50.8-mm diameter chrome-plated steel housing with grade-8 ceramic magnet ring

• Magnet has 18.14 kg of pull force on 9.5-mm clean steel plate

• Body is constructed of black anodized machined 6061 aluminum

• Weighs 0.20 kg

• Part no. 5193-03

• 85.7 mm steel body, 2131-01 — Prism Pole Adapter removable point

• Weighs 0.14 kg

• Part no. 5194-00

• Hardened steel replacement point for most SECO tripods and prism pole points

• Part no. 5194-003

• Removable 5/8 x 11 center

• Fits Zeiss-Wild tribrachs

• Also fits adapter sold separately (#2070-00)

• Part no. 2070-002

• 5/8 x 11 Female to 1/4 x 20 Female Adapter

• Part no. 2131-01

• 5/8 x 11 Female to 1/4 x 20 Male

• Weighs 0.08 kg

• Part no. 2131-00

• This prism allows for easy determination of right angle points or perpendicular points between two targets

• Part no. 4900-00

• 5/8 X 11 aluminum prism height adapters allow the base pole to be used with other manufacturer’s 360° prisms

• Part no. 2090-01 - Height Adapter for 77 mm Prism

• Part no. 2090-04 - Height Adapter for 115 mm Prism

• Part no. 2090-06 - Height Adapter to convert Robotics
Pole to GNSS Pole

• Anodized aluminum adapter features a female 5/8 x 11 with quick-release tip

• Adds 23.8-mm to length of rod

• Weighs 0.02 kg

• Part no. 5187-00

• Adds 76.22-mm to the pole length

• Use with 5187-00 GNSS Quick-Release Adapter

• Weighs 0.06 kg

• Part no. 5111-00

• Using adapters, any of the poles in the Quick Change series can be used for GNSS, robotics or total station surveys

• Quick conversions to another application by changing adapters

• Simple adapter determinations: 150 mm minus your target height = length of adapter needed

• Replacement points fit all SECO plumb bobs

• Part no. 6000-002

• 48.26 х 4.13 cm

• Use with upper section of your Rover Rod (not included)

• Weighs 1.72 kg

• Part no. 5125-056

• Thumb-Release™ Tripods creates  free-standing GNSS antenna poles or prism poles

• Feature large, smooth, thumb release buttons

• The thumb lock design allows  adjustment of tension without disassembly of the leg

• The universal head will accommodate poles from 25-to-32-mm
diameter

• Constructed of powder-coated aluminum

• Legs extend (independently) to 1.8 m for use in rugged terrain

• Weighs 2.60 kg

• Part no. 5218-02-FLY - Original Thumb-Release Tripod

• Part no. 5218-40-RED - Crain Contractor Series Thumb-Release Tripod

• A surveyor can set up a freestanding GPS antenna pole or prism pole 25-to-32-mm OD

• Poles attach easily through the open clamp 38.1 mm OD poles can be loaded through the top

• The legs (independently) extend 1.8 m and collapse to 109 cm

• Crain Contractors Series

• Weighs 1.93 kg

• Part no. 5217-04-FLY - Original Thumb-Release Bipod

• Part no. 5217-40-RED - Crain Contractor Series Thumb-Release Bipod

• Carbon Fiber Thumb Release Bipod uses the same design concepts as the SECO aluminum Thumb Release Bipod, but weighs less

• 25-to-32-mm diameter poles attach easily through the open clamp

• 38 mm OD poles can be loaded through the top

• Legs (independently) extend to 1.8 m and collapse to 109 cm

• Weighs 1.86 kg

• Part no. 5219-03

• The tripod features a ball-and-socket head, which makes leveling a bubble easy

• The rubberized jaws hold a pole (up to 5.08 cm OD) firmly in place

• Telescopic legs extend from 0.80 m to 1.27 m

• Weighs 1.20 kg

• Part no. 5214-00

• The Gardner Rod rest is a self-retracting ‘kickstand’ for survey rods

• Attaches quickly with one thumbscrew and is activated by simply pushing down a few inches on the handle

• Legs self-retract when the rod is lifted

• Made of durable anodized aluminum that won’t rust or fatigue and has a stainless steel clamp screw

• Holds the rod at a 20-degree zenith angle

• 32 mm Outside Diameter

• Weighs 0.70 kg

• Pole not included

• Part no. 5214-01